My Bookmarks

No Bookmarks

No Bookmarks

Data, news, tenders, public notices about energy, gas, electricity, water, coal, climate change, and intelligence 

More Recent News: 0 1 2 3 4 5 6 7 8 9

Tender: Tender 114760 - Corporate System, New South Wales, closes 17/05/2018 11:00 a.m. NSW ...

Tender No. 114760
Council invites tenders for the provision of an integrated management system and associated services as a part of a Corporate System replacement of current systems. Council is seeking to implement a comprehensive and fully integrated solution based on current open systems technology and standards.
Tender Documents which contain essential information and submission schedules may be obtained from free of charge.
Tenders are to be submitted online at: OR within a sealed envelope endorsed:
"The General Manager
Tender for Corporate Systems - Tender No. 114760"
and shall be placed in the Tender Box located on Level 4, 31 Victor Street, Chatswood so as to be received in full prior to 11am 17 May 2018 . Tenders received after the closing time will not be considered.
Further enquiries should be directed to Fritz Cardozo at
Debra Just

Tender: RFT 2018/ 095 PV Cell Array Design and Installation, New South Wales, closes 10/05/2018 2:00 p.m. NSW ...

NORTHERN BEACHES COUNCIL TENDER RFT 2018/ 095 PV Cell Array Design and Installation
The Northern Beaches Council is the formation of the merging of Manly, Pittwater and Warringah councils. It marks a new era and a period of exciting transformation. The new Council is committed to maintaining a high level of customer service to the local community.
Northern Beaches Council is working closely with the community to build strategies that enhance our quality of life, promote sustainable development and protect our environment.
NOTE: timing for the works is intended to commence from the end of May 2018 and will need to be completed by 27 June 2018.
Northern Beaches Council (Council) invites tenders for the carrying out and completion of minor works for PV Cell Array Design and Installation at two locations; (1) Cromer Depot Administration Building and (2) the Balgowlah Depot Mechanics Workshop. The scope of the works includes, but it not limited to the following at each site:
1. Design, supply and installation of solar PV systems including grid connect solar inverters, any power optimisers, solar mounting equipment/systems, new AC and DC switchgear, cabling, cabling protection and monitoring systems (further detailed in Part D Specification). The locations of the PV Arrays are indicatively shown within Part D Specification but are subject to the design of the awarded tenderer and final measurements onsite by the awarded tenderer.
2. The awarded contractor will provide their workshop design drawings (including locations on the roof) and other documentation necessary to Council for approval prior to construction.
3. A preliminary set of design drawings / details are to be included in the tender document submitted by the closing date.
4. All associated connections from the solar PV cells to the inverter to the existing main switchboard located on each site. Connections to allow to supply back into the authority grid is to be included.
5. Modification to the existing site switchboards to accommodate to solar PV system point of connection. Includes installation of labelling and signage in accordance with the requirements of the reference standards, guidelines and codes (further detailed in Part D Specification)
6. Grid connection application, approval and all associated works including all necessary liaison and payment of associated fees.
7. Commissioning and testing of the complete electrical installation
8. Safe roof access in order to complete the works. Tenderers are to submit details of their proposed safe access methodology for consideration by Council.
9. Hoarding / Barrier protection during the works period. Both sites are to be operational during the works period. As part of tender submissions, it is recommended to supply a map illustrating the indicative locations of material storage and roof access for both sites.
10. Provision of an updated single line diagram for each site to include the PV installation and connections. Supply of Operation and Maintenance manuals for the installations in accordance with requirements detailed within in Part D Specification.
11. On site training of Council staff (minimum allowance of 2 hours per site) in basic operation, maintenance, and troubleshooting of the PV system in line with Operation and Maintenance manual
12. Provision of warranty details for each component of the system including panels and inverters
13. Upfront Small scale Technology Certificates STC discount.
14. Supply, installation and programming of web-based data monitoring system according to specifications provided.
15. Optional for council consideration: Provide a cost for undertake a one-off clean of the panels, inspect the clips, brackets and fixings for deterioration and replace any faulty components to maintain the condition of the system.
1. Installation of safe roof access ladders (if none are located on site already).
The evaluation criteria for this tender are:
Schedule F1, Tender Form, Information only
Schedule F2, Non Compliance and Qualifications, Pass/Fail
Schedule F3, Business Information, Weighted
Schedule F4, Financial Information, Pass/Fail
Schedule F5, Performance Information, Weighted
Schedule F6, Industrial Relations, Not Used
Schedule F7, Quality Assurance, Weighted
Schedule F8, Work Health and Safety, Pass/Fail
Schedule F9, Environmental Sustainability and Social Equity, Weighted
Schedule F10, Personnel, Weighted
Schedule F11, Subcontractors and Consultants, Weighted
Schedule F12, Conflict of Interest and Fair Dealing Declaration, Information Only
Schedule F13, Insurances, Pass/Fail
Schedule F14, Proposed Methodology, Weighted
Schedule F15, Additional Information, Not Used
Schedule F16 , Design, Weighted
Schedule F17, Maintenance, Not Used
Schedule F18, Schedule of Works, Not Used
Schedule F19, Schedule of Spare Parts, Not Used
Schedule F20, Schedule of Interfaces, Weighted
Schedule F21, Schedule of Fee, Weighted
Weighted Criteria
Demonstrated past experience of the Tenderer, Schedules F3 and F5, 15%
Demonstrated past experience Personnel and Subcontractors, Schedules F10 and F11, 5%
Environmental Sustainability and Social Equity, Schedule F9, 5%
Proposed Methodology (including QA), Schedules F7, F14and F20, 15%
Proposed Design, Schedule F16, 20%
The Fee including Schedule of Lump Sum Fee, Schedule of Rates and Materials, Schedule of Rise and Fall and Other Fees, Schedule of Fees (F21), 40%
Full tender documents are available for download at a cost of $100 GST exclusive
A pre-tender briefing (which may include a Site inspection) will be held at Tuesday, 24 April 2018 at 9:00am at the Cromer Depot Administration building (55 Middleton Road, Cromer) followed by 10:30am at Balgowlah Depot Mechanics Building (46-48 Balgowlah Road, Balgowlah).
Tenderers should ensure they review the tender documents and understand the scope of work before attending the briefing. (See Part A5 - Conditions of Tender for details).
Tenders/Quotations close at 2pm on Thursday, 10 May 2018 and must be fully received by this time.
Submissions should be lodged in the electronic tender box or in the physical tender box at Northern Beaches Council, Civic Centre, 725 Pittwater Road, Dee Why, NSW 2099 by the time and date nominated. Late submissions may not be accepted.
Documents must be obtained after registration on the e-tendering portal which is free (see option below).
Tender enquiries should be directed to the Tendering Officer via the online forum (see forum option below).

Tender: Medical Technical Writing Services, A.C.T., closes 11/05/2018 2:00 p.m. NSW ...

ATM ID: Health/17-18/03975.
Agency: Department of Health.
Close Date & Time: 11 May 2018 at 2.00 pm (ACT Local Time).
Location: ACT.
ATM Type: Request for Tender.
Description: The Department of Health is seeking to engage Medical Technical Writing services for the Medical Service Advisory Committee (MSAC), its two subcommittees and additional services to the Technology Assessment and Access Division.
The Medical Technical Writers are to attend meetings of the Medical Service Advisory Committee and its subcommittees and understand and accurately capture meeting discussions through the provision of draft minutes. Medical technical writing services could also include providing writing services in the pharmaceuticals, medical devices, surgical and medical services.
Conditions for Participation: Each participant must demonstrate that a minimum of three staff have qualifications in a science/medical field. Technical Writer must provide evidence of certificate of registration in the form of a diploma, degree or certificate.
Timeframe for Delivery: As per the Approach to Market under A.A.2(e).
Address for Lodgement: AusTender at in accordance with instructions in the Request documentation.
Contact Details: Contact Officer. P: (02) 6289-1583. E:
This information is subject to change and should be verified on the AusTender Website. Documents available from Internet Site:
the following address (please click here)

More Recent News: 0 1 2 3 4 5 6 7 8 9

Media Mogul Toolbox

Get Weekly Volume

RSS Feed

(Log In to access search functions.)